300-115問題集、300-115試験対策、 300-115勉強資料、300-115試験材料、300-115試験問題集

admin   October 7, 2017   Comments Off on 300-115問題集、300-115試験対策、 300-115勉強資料、300-115試験材料、300-115試験問題集

Cisco CCNP 300-115試験を通して、あなたも自分の技能を高めて、仕事に役に立つスキルを多くマスターすることができます。
TestpassportのCisco CCNP 300-115問題集は自分自身を証明するために力を使用する必要があります。
弊社のCisco CCNP 300-115問題集は、ショートカットを提供するために、ITプロフェッショナルのために特別に最高の研究ガイドと最高のオンラインサービスを準備します。
弊社のCisco CCNP 300-115試験対策は試験の準備のための本当に完璧です。
弊社のCisco CCNP 300-115勉強資料を使用することにコミットして、最初の試行で試験に合格することを保証することができます。
弊社のCisco CCNP 300-115試験材料を購入した場合はあなたに同じ値の他の製品を送ること自由の完全な費用の払い戻しを与えることができます。

Implementing Cisco IP Switched Networks(SWITCH 300-115J)は、問題数 30 〜 40 問、解答時間 120 分の試験です。
Cisco CCNP Routing and Switching 認定および CCDP 認定を取得するには、この試験に合格する必要があります。
SWITCH 300-115J は、スイッチングに関する知識とスキルを証明する試験です。この試験の合格者は、シスコのエンタープライズ キャンパス アーキテクチャを使用した複雑な企業向けスイッチング ソリューションの実装を計画し、設定し、検証する能力があると認定されます。
SWITCH 試験の内容には、VLAN と WLAN のセキュアな統合も含まれます。

次に、Cisco CCNP 300-115試験の一般的な出題内容を示します。 ただし、試験によっては、ここに示されていない関連分野も出題される場合があります。 Cisco CCNP 300-115試験内容をより適切に反映させ、明確にするために、次のガイドラインは事前の通告なく変更されることがあります。

65% 1.0 レイヤ 2 テクノロジー
20% 2.0 インフラストラクチャのセキュリティ
15% 3.0 インフラストラクチャ サービス

弊社のCisco CCNP 300-115勉強問題集を利用したら、あなたは試験に準備する時間を節約することができるだけでなく、試験で楽に高い点数を取ることもできます。
弊社のCisco CCNP 300-115試験問題集はあなたが自分の目標を達成することを助けられます。
もし、弊社のCisco CCNP 300-115試験について問題集に興味があったら、購入するまえにインターネットで弊社が提供した無料な部分問題集をダウンロードして、君のCisco CCNP 300-115試験に役に立つかどうかのを自分が判断してください。
1.What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D
Explanation:
Up to 9 Cisco Catalyst switches can be stacked together to build single logical StackWise switch since
Cisco IOS XE Release 3.3.0SE. Prior to Cisco IOS XE Release3.3.0SE, up to 4 Cisco Catalyst switches
could be stacked together.
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series- switches/
qa_c67-722110.html

2.A network engineer wants to add a new switch to an existing switch stack.
Which configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Answer: A
Explanation:
Switch Stack Offline Configuration
You can use the offline configuration feature to provision (to supply a configuration to) a new switch before
it joins the switch stack. You can configure in advance the stack member number, the switch type, and the
inter- faces associated with a switch that is not currently part of the stack. The configuration that you
create on the switch stack is called the provisioned configuration. The switch that is added to the switch
stack and that re- ceives this configuration is called the provisioned switch.
You manually create the provisioned configuration through the switch stack-member-number provision
type global configuration command. The provisioned configuration is automatically created when a switch
is added to a switch stack and when no provisioned configuration exists.
When you configure the interfaces associated with a provisioned switch (for example, as part of a VLAN),
the switch stack accepts the configuration, and the information appears in the running configuration. The
interface associated with the provisioned switch is not active, operates as if it is administratively shut
down, and the no shutdown interface configuration command does not return it to active service. The
interface associated with the provisioned switch does not appear in the display of the specific feature; for
example, it does not appear in the show vlan user EXEC command output.
The switch stack retains the provisioned configuration in the running configuration whether or not the
provisioned switch is part of the stack. You can save the provisioned configuration to the startup
configuration file by entering the copy running-config startup-config privileged EXEC command. The
startup configuration file ensures that the switch stack can reload and can use the saved information
whether or not the provisioned switch is part of the switch stack. Effects of Adding a Provisioned Switch to

3.What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D
Explanation:
Up to 9 Cisco Catalyst switches can be stacked together to build single logical StackWise switch since
Cisco IOS XE Release 3.3.0SE. Prior to Cisco IOS XE Release3.3.0SE, up to 4 Cisco Catalyst switches
could be stacked together.
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series- switches/
qa_c67-722110.html

4.A network engineer wants to add a new switch to an existing switch stack.
Which configuration must be added to the new switch before it can be added to the switch stack?
A. No configuration must be added.
B. stack ID
C. IP address
D. VLAN information
E. VTP information
Answer: A
Explanation:
Switch Stack Offline Configuration
You can use the offline configuration feature to provision (to supply a configuration to) a new switch before
it joins the switch stack. You can configure in advance the stack member number, the switch type, and the
inter- faces associated with a switch that is not currently part of the stack. The configuration that you
create on the switch stack is called the provisioned configuration. The switch that is added to the switch
stack and that re- ceives this configuration is called the provisioned switch.
You manually create the provisioned configuration through the switch stack-member-number provision
type global configuration command. The provisioned configuration is automatically created when a switch
is added to a switch stack and when no provisioned configuration exists.
When you configure the interfaces associated with a provisioned switch (for example, as part of a VLAN),
the switch stack accepts the configuration, and the information appears in the running configuration. The
interface associated with the provisioned switch is not active, operates as if it is administratively shut
down, and the no shutdown interface configuration command does not return it to active service. The
interface associated with the provisioned switch does not appear in the display of the specific feature; for
example, it does not appear in the show vlan user EXEC command output.
The switch stack retains the provisioned configuration in the running configuration whether or not the
provisioned switch is part of the stack. You can save the provisioned configuration to the startup
configuration file by entering the copy running-config startup-config privileged EXEC command. The
startup configuration file ensures that the switch stack can reload and can use the saved information
whether or not the provisioned switch is part of the switch stack. Effects of Adding a Provisioned Switch to
Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-
2_55_se/ configuration/guide/3750xscg/swstack.html

5.What percentage of bandwidth is reduced when a stack cable is broken?
A. 0
B. 25
C. 50
D. 75
E. 100
Answer: C

6.What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D
http://www.testpassport.jp/CCNP/300-115.asp
http://pdf.testpassport.jp/300-115

B. 25
C. 50
D. 75
E. 100
Answer: C

6.What is the maximum number of switches that can be stacked using Cisco StackWise?
A. 4
B. 5
C. 8
D. 9
E. 10
F. 13
Answer: D